C-type - Walnut & Bronze
$159 $179
Choose type
Choose finish
STACT Premier C-type Wine Rack – Walnut & Bronze is a cork-out wall-mounted wine rack engineered to maximize bottle density, minimize visible hardware and keep every bottle directly accessible.
Walnut & Bronze
American black walnut and satin bronze anodized aluminum are a natural pairing — warm, rich and quietly sophisticated. The bronze complements the walnut’s depth and distinctive grain, creating a refined finish with the warmth and character of fine furniture.
Cork-out, perfected.
Traditional cork-out racks tend to force a choice: two slim pegs per bottle, or one oversized support. One is busy. The other is bulky.
C-type removes the compromise. Its patented shared-support architecture allows adjacent bottle positions to share STACT’s sleek, low-profile bottle supports, reducing visible hardware while increasing bottle density.
The result is the highest-density wall-mounted wine rack system on the market. As C-type scales, it approaches 10.68 bottles per square foot of wall area, while every bottle remains one deep and directly accessible.
Less hardware. More wine. Nothing between you and the bottle you want.
C-type at a glance
| Display | Cork-out; one bottle deep and directly accessible |
| Bottle capacity | 9 bottles on its own, plus an additional 3 bottles when panels are arranged side-by-side |
| Bottle density | Up to 10.68 bottles/ft² (115 bottles/m²) as the system scales |
| Bottle compatibility | Virtually all commercially available standard 750 ml wine bottles; Ø 2⅞"–3½" (73–89 mm) |
| Panel size | 14.28" W × 11.34" H (362.5 × 288 mm) |
| Projection | 7.44" (189 mm) rack depth; allow ~13–14" (330–355 mm) total from the wall when stocked |
| Panel finish | Furniture-grade American black walnut veneer |
| Bottle supports | Precision-machined aircraft-grade satin bronze anodized aluminum |
| Design | Designed in San Francisco by Eric Pfeiffer, 2012 ICFF winner |
Superior bottle stability.
BottleSecure™ combines a deeper, more settled bottle position with a rigidly reinforced support structure. More of each bottle rests below the support point than with conventional peg-style racks, naturally helping resist accidental dislodging.
Behind the panel, three concealed aluminum backplates reinforce the supports, minimizing flex and helping keep each bottle securely seated.
The result is substantial bottle support from a remarkably slim, visually restrained structure — without straps, rings, rubber gaskets or other visible restraints.
Supports all standard wine bottle formats.
C-type is designed to accommodate virtually all commercially available standard 750 ml wine bottles, from Ø 2⅞"–3½" (73–89 mm), including Bordeaux, Burgundy and even Champagne-style bottles.
Designed to be seen. Even without the wine.
Most wine racks rely on the bottles to hide the structure. STACT doesn’t. Every visible surface is finished, and the bottle supports are precision-machined as part of the composition, so open positions reveal more of the product rather than an unfinished framework.
Across all five STACT Premier panel types, the same proportions and hardware language carry through, creating a cohesive backdrop for the collection — however full the wall is, and however you configure it.
A custom wine wall. Without the custom process.
STACT is built as a connected system, not a collection of individually mounted racks. Its proprietary track-and-panel architecture uses connectable wall brackets and precision couplers to carry alignment from one column to the next as the wall is built.
Each panel then seats cleanly into place, so the finished installation reads as one continuous, purpose-built wine wall rather than a series of individually mounted panels.
C-type is one of five interchangeable STACT Premier panel types:
C-type · L-type · Shelf · Stemware · Expansion Panel
Every STACT Premier panel shares the same 14.28" × 11.34" (362.5 × 288 mm) footprint and mounting architecture. That means any panel can take the place of another — C-type, L-type, Shelf, Stemware or Expansion Panel — without moving the brackets or drilling new holes.
Change the mix. Not the wall.
Configure bottle orientation, shelving, stemware and open space around the room today, then rearrange, swap, add or reconfigure panels later as your collection, space or needs evolve.
Instead of commissioning a custom rack to be designed and fabricated for the space, STACT lets you configure a tailored wine wall from a finished system.
Measure the space. Choose the panel mix. Mount the system.
Ready to install.
Each STACT Premier C-type arrives complete with:
- furniture-grade finished panel
- bottle supports & fasteners
- wall brackets, couplers & anchors
- mounting template
Every component is finished and fully machined. No cutting, drilling, tapping, welding or field fabrication of STACT Premier components is required.
Installation uses common tools and can be completed by a capable homeowner, handyman, carpenter or contractor.
Once the wall brackets are mounted, each panel simply slips into place by hand — no tools required.
View the STACT Premier C-type Installation Manual →
Protected by patents in the U.S. and abroad. See STACT patents →